 |
|
TIG SOUND AC-DC 2240/M
- Single-phase direct and alternating current inverter power source for use in TIG and MMA-SMAW modes (except for cellulosic
electrodes).
- High duty cycle (220A at 40%, 180A at 60% and 160A at 100%)
- Minimum welding current of just 5 Amps.
- Pulsed arc for working even on thin sheets, where the heat transferred must be kept to a minimum
- Optional cooling unit (art. 1341) for water-cooled torches
- Optional trolley (art. 1656) for moving the power source and the cooling
unit.
- Arc start either in high voltage/high frequency or by contact with the Cebora lift system
- Possibility of remote control using the foot control (art. 193), remote control (art. 187), or up-down command on the
torch.
- Tunnel design allowing an exceptional cooling efficiency, keeping those components that suffer in dusty environments, such as electronic circuits, out of the cooling
flow.
- Adjustable “Hot Start” function to optimize the arc ignition in AC.
- PFC system, bringing substantial energy savings (the machine is suitable also for 16A power supply) as well as a wide supply voltage tolerance (+15% / -20%).
- Memory for storage of welding programmes
- RS232 port for connection to a computer, enabling easy software
updates.
- The power source can also be powered by motor-driven generators of adequate power (min. 8 KVA).
|
