SOUND MIG SYNERGIC 2230/M STAR Inverter single-phase synergic power source for MIG-MAG welding, with 2-roller Cebora wire feed unit in aluminium. Designed for use either in the automotive (particularly recommended for the MIG brazing of the galvanized sheet, of the high resistance steels and of the aluminium) or in the medium steel fabrication. PFC system, allowing a low electrical input as well as a wide tolerance on the supply voltage (+15% / -20%).  Simple and user friendly control panel which allows to select the right welding program according to the wire type and diameter as well as to the used shielding gas. Possibility to use alternately two types of torch: 4 m Cebora Push Pull Up/Down 2003 torch (art. 2003) and 3.5 m air cooled Cebora 280A torch (art. 1242) Possibility to use flux cored wires either with or without shielding gas, by simply reversing the polarity. Factory fitted with a wide range of synergic programs covering the various wire typologies in the different diameters. New synergic programs may be saved afterwards by means of a simple upgrade procedure through the RS232 port  Optional: trolley for transportation of the power source (art. 1656) The power source can also be powered by motor-driven generators of adequate power (min. 7KVA)

	Art. 299	Technical specs.
	230V 50/60 Hz (+15% / -20%)	Single phase input
	16 A	Fuse rating (slow blow)
	6.8 KVA 30% 4.9 KVA 60% 3.5 KVA 100%	Input power
	15 ÷ 220 A	Current range
	220A 30% 175A 60% 145A 100%	Duty cycle (10 min. cycle, 40°C, according to EN60974.1)
	Electronic	Stepless regulation
	Fe/St.St. 0,6/0,8/0.9/1.0/1.2 Al 0,8/0,9/1.0/1.2 CuSi3% 0.8/0.9/1.0 Flux cored 0,9	Wire sizes that can be used
	Ø 300 mm/15 Kg	Max wire spool size
	IP 23 C	Protection class
	27 Kg.	Weight
	320 x 585 x 500 h	Dimensions

Technical literature