POWER ROD 1840
  • Inverter based constant direct current power sources, designed and build by CEBORA using the latest knowledge of electronics technology applied to MMA welding in order to obtain the best arc characteristics
  • Suitable for MMA welding all rutile basic electrodes AWS 7018, in stainless steel and aluminium.
  • It can also be used for TIG DC welding with Cebora Lift ignition, together with the TIG Cebora T150 torch (art. 1567.20), featuring internal gas valve: the striking of TIG arc by contact is by means of the “start” button only, thereby avoiding any accidental ignition.
  • The high duty cycle (180A at 40%, 150A at 60% and 120A at 100%) makes it suitable for use in even the most extreme conditions.
  • Equipped with a thermostatic protection.
  • For MMA welding, a remote power supply control can be connected to the torch control cable (art. 187).
  • PFC system, assuring a substantial energy saving and makes it possible to use the power source with a mains fuse of 16A (slow blow). It also allows to get a wide tolerance on the supply voltage (+15% / -20%).
  • IP23 protection degree that makes it possible to use the power source outdoor.
  • The power source can also be powered by motor-driven generators of adequate power (min. 6KVA).





Art. 261
Technical specifications
230 V
50/60 Hz (+15% / -20%)		 Single phase input
16A Fuse rating (slow blow)
6,0 KVA at 40%
4,7 KVA at 60%
3,6 KVA at 100%		 Input power
10 ÷ 180 A Current range
180 A at 40%
150 A at 60%
120 A at 100%		 Duty cicle 
(10 min, 40°C)
Electronic Stepless regulation
ø 1,5 - 4 Electrode that can be used
IP 23 Protection class
    		• Authorised for use in areas of increased hazard of electric shock
    9,5 Kg. Weight
    172 x 420 x 340 h Dimensions


    Technical literature